pilot air screw setting

[clankie]

Hi does anybody have the pilot are screw settings for a 600 monster 2000 vintage . I forgot to write down how mine where set when I stripped the cards . I know I'm a numtty .

[slob]

This is a bit of a guess but if no-one else answers I'd try 1.5 to 1.75 turns out as a starting point

[gary tompkins]

They don't quote a base setting in manuals

Adjustments are made while taking CO readings from exhaust

[clankie]

Thanks slob that gives me a base setting to get it running .the only manual I have is the Haynes one and it says to take it to a dealer !! Which ain't going to happen .

[Dookbob]

From experience with quite a few M600 models I have found that two and a quarter turns from the closed position will get you close to where you want to be.

[Icanopit]

Just re-checked my 2001 600, fitted with stage 1 Dynojet kit 2.125 turns out on a 7k mile engine, also using a CO (pro) meter.

[gary tompkins]

You must have a very well calibrated screwdriver hand ;)