Bearings

[clankie]

HI does any body have a list of the bearings fitted to a 600 monster 2000 model so i can get them from a bearing supplier . as all the bearings on my bike are completely shoot .

[slob]

Can you be more specific? Both wheels and steering head or more?

[clankie]

Can you be more specific? Both wheels and steering head or more?

hi well i need wheel bearings,steering head,sprocket carrier ,rose joints for the rear hoop,and i might aswell replace the swinging arm bearings aswell and the the shock rocker arm ones aswell .

[slob]

Wheel bearings and sprocket carrier on yours (large spindles) are Koyo 60052RSC3 or equivalent

Steering head, I'm not sure, Ducati use ball and race but check out www.wemoto.com for taper roller replacements.

Rocker is HK1514 on M900 not sure if someone can confirm whether yours is the same?

Swingarm is 764000004 from Ducati @£5.01 +VAT, you need four (or SKF HK2016/Torrington HK2015)
seals for above 93041271A are £1.75 +VAT, again four required (I've just priced these at Moto Rapido this morning)
These can be a royal PITA to change http://www.ukmonster.co.uk/monster/showthread.php?t=37764 so if they're okay leave them.

Rose joints SMG1040 (or JAM10) 10mm Bore M10 x 1.5 Thread

the Search function at the top of the page will find most of this with a little patience ;-)
Best of luck with the rebuild!

[Zimbo]

Nice useful post Rob!

[clankie]

thanks for that rob realy helpful i will order them in the morning .as for the swinging arm pivot bearings they have to be replaced as they are just rust .so i can see fun and games coming up !!!