View Full Version : Oil leak -any experience?
Matt FT
18-02-2013, 05:01 PM
Hi all,
I've got an oil leak from the sensor next to the oil filling cap.
http://flic.kr/p/dVWbC9
Any ideas on a fix?
Matt
Nickj
18-02-2013, 06:01 PM
That'll be the oil pressure sensor, assuming it's working OK and goes off when the engines starts then it'll probably be a simp[le case of remove replace base washer with something in ally or copper (a soft material washer) then refit.
If you feel really cheap or can't find a suitable washer some PTFE tape would stop the leak and not cause any problems with the sensor.
If it's leaking through the sensor then replace, it's a common item, the ones from Nova's work OK
Matt FT
19-02-2013, 08:55 AM
Thanks. It's the sensor itself rather than the washer so I'll get one on order. anyone know a good online Ducati parts supplier?
Nickj
19-02-2013, 10:10 PM
Just call any Ducati dealers they'll post one if they aren't local. Usually bits like this are cheap, anyone quoting silly numbers say over £10 ignore and go get Vauxhall / GM part number 93190643.
This has the same pressure trigger range
gary tompkins
19-02-2013, 11:53 PM
Yes once they start to leak the switch is knackered
I had a second one fail on the trike last september coming back from Belgium.. didn't leak but not reading pressure at all
Matt FT
20-02-2013, 09:15 AM
thanks all. Looks like a simple switch out. anyone know any different?
jerry
20-02-2013, 03:34 PM
go online and get Zauxhall agila one much cheaper than ducati ...
Matt FT
21-02-2013, 11:23 AM
go online and get Zauxhall agila one much cheaper than ducati ...
Done, £2 each. Lovely. Weekend fettling sorted :)
urbanfireblade
22-02-2013, 05:23 PM
Nice tip on the car alternative one.
vBulletin® v3.8.3, Copyright ©2000-2024, Jelsoft Enterprises Ltd.