Wanted for project 748/916 type stock rearset controls

[Albie]

Wanted for cafe racer project 748/916 type stock rearset controls. Needed to give my project a bit more racer position. Would prefer stock parts than aftermarket but require cylinder too but I can source one. Reservoir not needed but brake switch would be good.

Poor condition considered.

Or anything similar that is complete. SS looks wrong angle but will consider.

[Albie]

Does anyone know someone breaking a race bike at all. Even a Yamaha or suzuki.

You may be able to work the angle but I will be and could cut off brackets and reweld in any position. I just want minimal controls.


http://i97.photobucket.com/albums/l209/albies4/Cafe%20Racer%20Project%20%20Yamaha%20SRX400/010.jpg

http://i97.photobucket.com/albums/l209/albies4/Cafe%20Racer%20Project%20%20Yamaha%20SRX400/038.jpg

[gary tompkins]

Maybe these could be made to fit?

http://www.ebay.co.uk/itm/1994-CAGIVA-MITO-LEFT-FOOT-HANGER-REARSET-/300603185382?pt=UK_Motorcycle_Parts&hash=item45fd5898e6

http://www.ebay.co.uk/itm/1994-CAGIVA-MITO-RIGHT-FOOT-HANGER-REARSET-/300603186104?pt=UK_Motorcycle_Parts&hash=item45fd589bb8

[Albie]

I have now sourced a set of good complete foot controls inc brake switch, reservoir cylinder from a Suzuki TL1000s. For the princely sum of £60 and just a mile from me and on ebay too. No postage .

Thanks if you looked for me. Now I just need the seat and exhausts doing. Oh GT i will need that favour of welding but I can throw it in the car with engine out.

If anyone needs a TL1000 engine I know where theres one :mand: Hmm intersting in the srx frame :idea::idea::worried::worried:

[gary tompkins]

Glad you found something in the end

These look well made - lots of different types to choose from too

http://www.ebay.co.uk/itm/Aprilia-RSV-Mille-1000-SP-R-Race-Track-Day-Rearsets-/270803378369?pt=UK_Motorcycle_Parts&hash=item3f0d23a0c1

http://www.ebay.co.uk/itm/Suzuki-SV650-SV-650-Race-Track-Day-Rearsets-/390340569946?pt=UK_Motorcycle_Parts&hash=item5ae21c6b5a

[Albie]

Glad you found something in the end

These look well made - lots of different types to choose from too

http://www.ebay.co.uk/itm/Aprilia-RSV-Mille-1000-SP-R-Race-Track-Day-Rearsets-/270803378369?pt=UK_Motorcycle_Parts&hash=item3f0d23a0c1

http://www.ebay.co.uk/itm/Suzuki-SV650-SV-650-Race-Track-Day-Rearsets-/390340569946?pt=UK_Motorcycle_Parts&hash=item5ae21c6b5a

Only trouble with those Gary is you need all the other bits like cylinder and brake switch. I just went down to collect and he has a garage full of bikes and more . Even gave me a spare master cylinder as one didnt have the reservoir bottle on it. Had a dry test and they will fit for sure. Think same angle frame so it will just be a case of lopping off all brackets and remaking a parallel plate with tapped holes or nuts welded on. I do think the brake levers too long too and will just not clear the kickstart. So I will lop off and fit a new end. Gear lever should be ok other than swapping end for my bigger diameter spline.
Jobs a goodun.
He has also recommended a local powercoater in sittingbourne.I may give them a try. £80 a frame. £20 a swingarm and wheels £25. Im leaving my wheels for now.

[gary tompkins]

Only trouble with those Gary is you need all the other bits like cylinder and brake switch. I just went down to collect and he has a garage full of bikes and more . Even gave me a spare master cylinder as one didnt have the reservoir bottle on it. Had a dry test and they will fit for sure. Think same angle frame so it will just be a case of lopping off all brackets and remaking a parallel plate with tapped holes or nuts welded on. I do think the brake levers too long too and will just not clear the kickstart. So I will lop off and fit a new end. Gear lever should be ok other than swapping end for my bigger diameter spline.
Jobs a goodun.
He has also recommended a local powercoater in sittingbourne.I may give them a try. £80 a frame. £20 a swingarm and wheels £25. Im leaving my wheels for now.

It may be worth trying the powdercoaters I've used in Dartford for a quote. They did my trike rear subframe and rack, and also had the Morini chassis done there ages ago. They are on a business park near where Glaxo factory used to be.

http://www.craymetalfinishers.co.uk/

[scrapps]

Only trouble with those Gary is you need all the other bits like cylinder and brake switch. I just went down to collect and he has a garage full of bikes and more . Even gave me a spare master cylinder as one didnt have the reservoir bottle on it. Had a dry test and they will fit for sure. Think same angle frame so it will just be a case of lopping off all brackets and remaking a parallel plate with tapped holes or nuts welded on. I do think the brake levers too long too and will just not clear the kickstart. So I will lop off and fit a new end. Gear lever should be ok other than swapping end for my bigger diameter spline.
Jobs a goodun.
He has also recommended a local powercoater in sittingbourne.I may give them a try. £80 a frame. £20 a swingarm and wheels £25. Im leaving my wheels for now.

I am taking frame swing arm and lots of bits to the coater i use so if you not in a big rush (got to strip bike yet) it works out cheaper if done together.
you know they do a good job cos you have seen the finish on my bike....

[gary tompkins]

Just remember to mask off the frame numbers ;)