M600 Hi-Level Exhausts

[Dougalthedog]

My bikes has a home made (not by me) 2 into 1 sysetm that visually lets down a very clean and well kept example of a 95 M600.

I've managed to source a standard front end and a pair of new Remus cans, other than the link pipes what else do I need to convert to twin hi level.

Where can I get the link pipes and other bits I need.

I've spent most of this afternoon ringing breakers and exhaust suppliers without any joy - "its to old" is the most common answer.

Any advice greatly appreviated.

[Paranoid Dave]

have you got the high level hangers as well that bolt under the frame. You might need to move the rear indicators too?

[Albie]

You may also need spacers to bring the footrest hangers out approx 10mm to clear the pipes too.

[Dougalthedog]

Looks like the hi level might be a bit pricey to do right now so I will settle for standard fitment if I can find some cans and link pipes.

Spent all weekend :dizzy: on the net and cant find anything apart from brand new stuff which is way too expensive in comparion to the value of the bike.

Must be somebody out there who has replaced standard for aftermarket and wants to sell.