View Full Version : It's just NUTS
stormcock
13-12-2009, 03:21 PM
Does anybody know where I can get Titanium Rear Axle Nuts. (M17 x 1.5mm)
I'd give Pro-bolt a call, they don't list one on line but you never know
+44(0)1684 851940
http://www.tastynuts.com/
stormcock
13-12-2009, 03:45 PM
Cheers Santa Rob. :thumbsup:
CK & AK
13-12-2009, 06:35 PM
Search Ebay - they are on there regularly for different Ducati's :)
stormcock
13-12-2009, 08:05 PM
Search Ebay - they are on there regularly for different Ducati's :)
Cheers.
You wouldn't happen to know which other Dukes use a M17 x 1.5mm Flanged Nut would you?
stormcock
14-12-2009, 04:00 PM
I'd give Pro-bolt a call, they don't list one on line but you never know
+44(0)1684 851940
http://www.tastynuts.com/
They've just got back to me with no luck I'm afraid. Anybody else got any pointers?
Stainless will do.
Pomp1
14-12-2009, 04:21 PM
http://lls.it/37-dado-daip_din_985_titanio.html try this page, the company is lls.it, the online shop is http://www.4moto.it/
stormcock
14-12-2009, 11:07 PM
http://lls.it/37-dado-daip_din_985_titanio.html try this page, the company is lls.it, the online shop is http://www.4moto.it/
No luck there either. :scratch:
I didn't think it'd be this difficult to get two nuts. :eyepopping:
Pomp1
14-12-2009, 11:10 PM
No luck there either. :scratch:
I didn't think it'd be this difficult to get two nuts. :eyepopping:
Yep.I've checked the sizes and seems not to go up to that size. I'll ask a couple of mates in Italy and I send this people a mail as I'm sure I've seen some large nuts at their stand at the EICMA. Give me a couple of days and I'll let you know.
stormcock
15-12-2009, 09:28 AM
Yep.I've checked the sizes and seems not to go up to that size. I'll ask a couple of mates in Italy and I send this people a mail as I'm sure I've seen some large nuts at their stand at the EICMA. Give me a couple of days and I'll let you know.
The MAN'S a STAR. :hail:
Pomp1
15-12-2009, 12:57 PM
Is it M17 the internal diameter I take.
Pomp1
15-12-2009, 01:00 PM
While I wait for answers from Italy give this people a call:
http://www.ssfast.co.uk/othermaterials.htm
stormcock
15-12-2009, 01:24 PM
Is it M17 the internal diameter I take.
Damn, damn, damn. :fou: :cens:
Sorry one and all, it would appear that when I used the Vernier to measure the shaft, it wasn't set to zero, turns out it's a bog standard M16, albeit a fine thread.
I'll get me coat :twak:
sburrows87
15-12-2009, 05:02 PM
Oh dear lol!
stormcock
18-12-2009, 12:20 PM
Managed to locate a couple of Stainless Nuts of eBay, they're originaly listed as for a Moto Guzzi 1000 and the come with a washer rather than a Flanged Nut.
I also located a place in the USA that had Titanium Flanged Nuts for approx £33 a pair (inc p+p) here: Titanium Nuts (http://www.racebolts.com/index.php?main_page=product_info&cPath=623_656_658&products_id=327)
vBulletin® v3.8.3, Copyright ©2000-2024, Jelsoft Enterprises Ltd.