2006 s2r 800

[neilbaldry]

http://i20.photobucket.com/albums/b208/neilbaldry/My%20Duc/MyS2R50.jpg

My little beastie. (As she stood before I went to the Falkland Islands for 4 months - A few more bits have arrived since then, but its not all together yet!)

[kneedown]

hi looks very nice 'i take it full system ? did you have to change ecu ? or anything
where did youget it and how much dare i ask ?

[neilbaldry]

Its a Zard full system. It cost me (back in 2007) £830 (ish). I have a PCIII, but not a personalised map yet. Availability wise, you can get it at most places. I got mine from Spareshack.

[kneedown]

ok thanks 'and it runs ok without anything eles done ?

[Yorkie]

Nice to have you back and fettling!

Yorkie

[neilbaldry]

ok thanks 'and it runs ok without anything eles done ?


Before I bought the PCIII it did burble abit more on the overrun, but it ran ok. I took my bike to an Italian bike independant dealer, who had a Ducati magic box, and altered the fueling a bit, but a PCIII will really sort it out a treat.

Just watch out, as the system doesnt com e with any heel guards, and I have melted 2 right foot boots....... but that will change after I do a quick mod (there are a few home made attempts floating around the net).

I also have pod filters which changed it alot more, so with stock airbox, it shouldnt be too bad.

They have released a 'shotgun' version now aswel

https://secure.speedycom.co.uk/shop/product.php?printable=Y&productid=17422&cat=535&page=1

(The top image)

[kneedown]

it is prob bit more now than i can really spend 'been looking for second hand '
but without much luck .which dealer did you go to ?

[neilbaldry]

Spareshack mate.

[kneedown]

sorry i meant to get it running better

[neilbaldry]

When I took my bike for a service to Carl Harrison M/C, he done it then. He plugged his Ducati Diagnostic box into my ECU and did from there I think. Any official Duc dealer should have one

[kneedown]

ok cheers i'll have to keep looking 'like the look of akrapovic slip on .they are well made

[neilbaldry]

if you like the look of the akra's, then marving do a similar single can. they also can be got at Spareshack.

[littlejimmy12]

I've burnt a pair of tainers and a pair of boots, I noticed the all too familiar black marks on the pipes. You running with baffles out, I do and they sound incredible, best mod I did to my S2R was going to black wheels. Prefer the colour and less to clean.

[JerryXt]

wocha Neil, how are you?

[neilbaldry]

Hey Jerry, I am pretty good! All is well!

Littlejimmy, I took the baffles out before I actually fitted the system!

I just bought a set of carbon guards that would normally fit to the standard 's' pipes, and will retro fit them..... Somehow!

Oh, and my carbon fetish is satisfied........................ for now!

[neilbaldry]

A last! more up-to-date photo's. Although I am still waiting for the number boards to turn up and put on the seat cowl.

http://i20.photobucket.com/albums/b208/neilbaldry/My%20Duc/MyS2R53.jpg
http://i20.photobucket.com/albums/b208/neilbaldry/My%20Duc/MyS2R51.jpg
http://i20.photobucket.com/albums/b208/neilbaldry/My%20Duc/MyS2R52.jpg

[BluprintZ]

Looking good Neil.

G : ) :thumbsup:

[pegboy]

Thats really nice, i think that will be my next bike, not actually yours but a S2R. They are growing on me fast

[Albie]

Thats really nice, i think that will be my next bike, not actually yours but a S2R. They are growing on me fast

gully is sadly selling his. he is in bexley. kitted up to with full arrows and some nice carbon

[pegboy]

I would love to at least look but can not because if i do i will want to buy, then will have to break the news to Mrs P and that could dangerous. Going to start looking early part of next year and hopefully have something for the summer, if we have a summer that is.

Thanks all the same.

gully is sadly selling his. he is in bexley. kitted up to with full arrows and some nice carbon

[Albie]

you probs would want yes. here it is anyhow if someones interested.

http://i97.photobucket.com/albums/l209/albies4/UKMOC%20bike%20pics/Gullys.jpg

[pegboy]

mmmmmmmmmmm NICE!!!!!

[kneedown]

that is very nice 'i would love to get some pipes for mine but have not got the money at the mo .
maybe next year

[neilbaldry]

I bought a new legal sized plate the other week (for my -first- MOT) and it looks bloody horrible!!!!

[kneedown]

joined the termie club this wekk now have s4r 998

[neilbaldry]

How are you finding the termis then Kneedown?

[kneedown]

well it is a new bike 'well new for me '
the s4r with white wheels only started half the time i had it so back its gone and i hope this one will be ok .....so far great sounds really good goes well the brakes are so much better :mand:

[uksurfer]

hi , how hard was it to cut the carbon tail piece? it looks very short, and is a good idea, or did you buy like that?

[neilbaldry]

the carbon tea tray? i bought it from an american site called shift tech. its meant to be used in conjuction with the framed reduced a la tail chop.

[uksurfer]

cheers neil, not sure about price though, might have to take the saw to mine......

[Albie]

cheers neil, not sure about price though, might have to take the saw to mine......

You could probably lop an 1" 1/2 off the carbon tea tray by remounting a plate with two sets of holes and trimming back end off. I nearly did it. The dremel cuts it easy but use a dust mask.

[neilbaldry]

http://i20.photobucket.com/albums/b208/neilbaldry/My%20Duc/MyS2R55.jpg
http://i20.photobucket.com/albums/b208/neilbaldry/My%20Duc/MyS2R56.jpg

New cans are on, courtesy of seby! I have yet to get that darned twist grip on!

[seby]

uuuuuuuuuuuuu
i know them :D

[neilbaldry]

Pretty straight forward to fit. Although I cant find my part to secure the left hand side of the decat pipe, and I nolonger have the bits to secure my heatshied to the top pipe! darn!

[seby]

try to get something smaller and cheaper than this
http://cgi.ebay.co.uk/2-Real-Carbon-Fibre-Sheets-16-x-34cm_W0QQitemZ330376465624QQcmdZViewItemQQptZUK_Ca rsParts_Vehicles_CarParts_SM?hash=item4cebf8ccd8#h t_500wt_961
and using the dremel you can create a plate
on the left side u can use as well a piece of carbon

[Saint aka ML]

Nice bike mate.

What diameter are those pipes?
Is it a full system, ie it does all the way to hedders?

[seby]

termignoni full system is available only for s4rs testastretta engine
if i do remember pipers are 45mm and 50 are the finals

[neilbaldry]

Quick update:

http://i20.photobucket.com/albums/b208/neilbaldry/My%20Duc/MyS2R60.jpg

http://i20.photobucket.com/albums/b208/neilbaldry/My%20Duc/MyS2R59.jpg

http://i20.photobucket.com/albums/b208/neilbaldry/My%20Duc/MyS2R61.jpg

Still need to put on the front indicators, and get flasher relays for front and back as they are LED's. Then she is good to go!

[rac3r]

I Like! Especially those termis :cool:

[littlejimmy12]

satin black wheels ????

[neilbaldry]

satin black wheels ????


No-way Jose!

When I ordered my S2R at the Ducati dealers, I had to wait 3 months for a red/white and white wheels!

- Unless there is an 848/1098/1198 set of wheels on a freebie?!

[neilbaldry]

I Like! Especially those termis :cool:

I bet they would look smart on a dss Monster...............

[neilbaldry]

Went out on mine yesterday for the first time since September 2009....... It was a long time coming, but I am glad I got out on it finally!

[rac3r]

I bet they would look smart on a dss Monster...............

Don't give me ideas pleeeeeeeeeeeeaaaseee! :hissy:

It would look frikin awesome!

[rac3r]

http://i655.photobucket.com/albums/uu274/rac3r786/cans.jpg

:chuckle: :running:

[neilbaldry]

Sort of similar to the 2006 sport classic................. Those cans would also work! - A bit more retro cool.

[rac3r]

Would be cool If it's a simple swap