PDL
10-07-2009, 12:45 PM
After my post last week, I decided to service my brakes. Took the pads out and checked how much was left on them, which was lots. So cleaned them up, cleaned up the calipers and pots, re greased the pots and copper slipped the back of the pads. Put everything back and set the brake lever to number 4.
The brakes are now superb, as opposed to dodgy when set at number 1.
However, strangly the black dust on the right hand front side of the engine casing has stopped building up.
Why?
The brakes are now superb, as opposed to dodgy when set at number 1.
However, strangly the black dust on the right hand front side of the engine casing has stopped building up.
Why?