Will the levers from a 620 fit a 600?

[katana]

Just wondering as there are a set on here and I need another set as I managed to break the clutch and brake levers (don't ask) and need replacements.

[gary tompkins]

Not 100% sure - but early 600's have different clutch/brake master cylinders to the 620's

There may be a cross over where late 600's (1999-2001) had the same as the 620. Ducati have a habit of using left overs to complete a production run, so many monsters came out of Italy with a mix of parts. This is one reason dealers ask for frame/engine numbers when identifying spares, as it's the best way to check parts will match. Registration mark won't help because bikes often sit in dealers for ages before being registered.

[CK & AK]

If you have the big hole through the pivot of the lever with the large nut on the underside - then yes they should fit
If you have the solid pin in it (late sportsbike type) - then prob not

AK

[katana]

If you have the big hole through the pivot of the lever with the large nut on the underside - then yes they should fit
If you have the solid pin in it (late sportsbike type) - then prob not

AK

Well its a '97 bike, the levers have the holes and currently running with multistrada hand guards.

[Space Cadet]

Katana, my 620 leavers are the ones with a big hole and a nut underneath, hope this helps.