S4R - Termi performance increase

[PDL]

My S4R has termis, de cat, chip and open air box fitted. Does anyone know the BHP and Torque increase over stock? I think standard is 113bhp and 73lb ft of torque. I would guess and increase of up to 123bhp and 77lb ft but it would be nice to know.

[NattyBoy]

My S4R has termis, de cat, chip and open air box fitted. Does anyone know the BHP and Torque increase over stock? I think standard is 113bhp and 73lb ft of torque. I would guess and increase of up to 123bhp and 77lb ft but it would be nice to know.

According to Ducati for those mods you'd only be looking at about a 5% gain over standard. Bikes can vary in power surprisingly from new so its diffuclt to know until you get it on a dyno.

The DP ECU is a fairly crude device so to get any kind of decent performance gains you are going to have to run a dpower commander and get some dyno time - especially if youve fitted a decat pipe.

[PDL]

So we are looking at approx 118bhp and 77lb ft of torque. I think I will take your advice and get a PCIII fitted. Thx

[rollo22]

Found this on the termi site might help there for a SR4 testastretta
hope it helps