PDA

View Full Version : Replacing ECU/Air Fliter on 696


R-KivE
26-09-2008, 04:39 PM
Ordered the termi carbon pipes and ecu/air filter, I shouldn't have a problem with puttin the cans on, but not sure about the ecu.

Can anyone tell me if it will be easy to do? and any tips.

cheers

Arbeia
26-09-2008, 06:09 PM
putting the filter and ecu unit in is a doddle,u just have to take the tank off 1st. when you get the tank off its all self explanatry.
http://i130.photobucket.com/albums/p258/arbeia/DSC00111.jpg

Duke_Hatty
26-09-2008, 07:05 PM
Getting the tank off is a bit of a faff though, isn't it?

:)

Arbeia
26-09-2008, 07:40 PM
nope. 1 alan key does the lot. its really straight forward.

Duke_Hatty
27-09-2008, 06:32 PM
nope. 1 alan key does the lot. its really straight forward.

Yeah, but it's guesswork as to which bolts you have to remove to get the cover off, and there's dozens of the little buggers! I must have guessed unwisely...!

:D

Arbeia
27-09-2008, 06:47 PM
There`s 2 That Fasten It To The Frame On Each Side And 1 That Goes Thru The Middle Underneath.

Duke_Hatty
27-09-2008, 06:50 PM
There`s 2 That Fasten It To The Frame On Each Side And 1 That Goes Thru The Middle Underneath.


I take it you mean the actual tank when the covers are off? That's the easy bit!
:)

Arbeia
27-09-2008, 08:04 PM
Getting the tank off is a bit of a faff though, isn't it?

:)

Thats what you said the tank,not the tank covers.
The tank covers are easy aswell 10min job.bolts over the top ,2 on the side and 2 under seat ,slide back and hey presto...off:rolleyes:

Duke_Hatty
27-09-2008, 09:22 PM
Thats what you said the tank,not the tank covers.
:rolleyes:


WRONG! Nope, I didn't. Look up and read again, matey!

....which bolts you have to remove to get the cover off



;)

Arbeia
28-09-2008, 08:20 AM
Getting the tank off is a bit of a faff though, isn't it?

:)
The evidence is there my friend:fou:

Duke_Hatty
28-09-2008, 07:08 PM
The evidence is there my friend:fou:


OK, cleverclogs, YOU try getting the tank off without removing the cover first!

:twak:

Arbeia
28-09-2008, 07:12 PM
LOL U SAID THE TANK NOT THE TANK COVER:dizzy: DID U OR DIDNT YOU?

Ian Blythe
28-09-2008, 07:24 PM
Hi mate last time I saw you I said every time i see your bike its getting smaller sorry mate I didn't mean it

R-KivE
08-10-2008, 05:59 PM
I have got the tank off and cannot find the air filter, any help?

CK & AK
08-10-2008, 06:20 PM
Follow the air tubes - they feed into the airfilter housing.

erm, are you sure you should be doing this on your own - might be worth getting someone who knows their way round a bike to help out?

AK

Arbeia
09-10-2008, 09:56 PM
directly behind the ignition barrel is the airfilter. u have to inscrew about 3 screws if i can remember.
then u lift the plastic casing off to reveal airbox.