PDA

View Full Version : tail chop and hi level termis

DANNY WRIDE
10-08-2008, 03:46 PM
i jus ordered one of thm compewerkes tail chops but not sure if num plate will fit between me hi level termis
alreadyinuse
10-08-2008, 03:58 PM
nope it wont,
not a full sized one anyway
DANNY WRIDE
10-08-2008, 04:07 PM
nope it wont,
not a full sized one anyway
anythin i can do
dlloyduk
10-08-2008, 04:57 PM
You may need to Chop a few inches off the Termi's to stop it looking like a wheelbarrow. 3"-3 1/2" seems to look ok.
alreadyinuse
10-08-2008, 05:00 PM
depends how many digits your plate has and if any are 1's.

get a new plate. the new style digits are smaller than the old ones. because new style plates have an extra character.
Then trim it.

if you have 7 digits and no 1's then a 3/4 size plate
dlloyduk
10-08-2008, 05:05 PM
7" x 5" or 5 1/2" fits perfectly. Try fleabay you can find for around £7.00 ish.

Mines 5 1/2" sailor with 7 digits.
DANNY WRIDE
10-08-2008, 10:07 PM
7" x 5" or 5 1/2" fits perfectly. Try fleabay you can find for around £7.00 ish.

Mines 5 1/2" sailor with 7 digits.

is it legal
dlloyduk
11-08-2008, 08:15 PM
C'mon of course not! Not had any trouble though either with noisy cans or plate.
Was asked by plod once if it was the correct size. "not sure mate but its as big as you can fit in between the exhausts" ....."Yes they are a bit loud as well-but its a Ducati so that's what you expect"....."Thanks officer and bye for now"