mirror bracket - help needed

[singletrack]

I have swapped my brake and clutch master cylinders for those from a 748.

Here's a picture of the bracket on the brake side.
http://ukmonster.co.uk/photopost/data/500/medium/s2r_black_012.jpg

The brake side is ok, but I need a new mount for my mirror on the clutch side.



The mount from an S4R won't fit. It's the wrong way up ( vertical instead of horizontal)The only thing I can come up with is a clamp round the bar like this one:
It's not really what I want because it is the wrong colour.
http://cgi.ebay.co.uk/pair-of-clamp-on-Mirror-adaptor-black-carbon-or-silver_W0QQitemZ310058196924QQihZ021QQcategoryZ256 28QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Is this going to fit
a - round the bars of my S2R
b - the mirror on the clutch side? (ie is it the correct thread and size?.)


Also is it similar to the ducati part mentioned here by Albie?
http://www.ukmonster.co.uk/monster/showthread.php?t=26596&highlight=mirror+adapter&page=2


or does anyone know of an alternative? I would rather have something gold.
Does anyone have a bike with brackets like this? Any of the older Monsters?

[Pedro]

Can't you just get another one as per the brake side?

[singletrack]

Can't you just get another one as per the brake side?

It's a bit complicated.

I am not sure where that one came from. I think it was on Shaun's S4R when I bought his brakes. Moto Rapido fitted the brakes for me.

I got the clutch lever and cylinder from a 748, which has no mirror attached so I ordered the bracket from an S4R for the clutch side but it did not fit.

There must be a bike with similar brackets, but I need to know which one so I can order them.

I will ask Craig at MR if he has any ideas, but it is Thursday tomorrow (his day off) so it will have to wait.

[slob]

Anne,
yours look the same as 1000ie clamps to me.
http://www.ukmonster.co.uk/monster/attachment.php?attachmentid=11579&d=1213310508
the brake side is reverse thread (it has little cuts on the edges of the lock-nut to indicate this)
http://www.ukmonster.co.uk/monster/attachment.php?attachmentid=11580&d=1213310512
you should be able to confirm what you need by screwing the l/h mirror into the r/h side clamp... it it goes in ok, just order another r/h side clamp top.

Hope this makes sense.

[singletrack]

Thank you slob - it does look like the 1000ie clamp. :mand:

I have DP mirrors so hopefully I just need a standard clutch clamp with the normal (not reverse) thread, but I will check it is not the reverse one first.

[singletrack]

The M1000 clamp fitted - thanks rob.
I also had problems getting the right clutch switch but eventually found that the brake switch from a 999 fits!