LED tail light plus indicators

[faulkss]

Hi,

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=150238016337#description

Anyone seen these in real life, and if so are they good?

Cheers

Steve

[YoungDucS4R]

I've had the integral tail light fitted on both my S4R and S4RS.
Works a treat, looks great and easy to fit. Didnt need to fit the resistors or install a different relay. Flashing rate remained as per normal.
I also removed the stock rear indicators which cleans up the lines at the back for a much improved look.

YD

[Albie]

I believe Darry has one and its ok. Not as visible as separate indi's but yes they are visible. Plus side they are neat and tidy and a bit COOL :mand:

[mad_turnips]

Sazzag has somthing similar which was pretty clear

[JMo]

I have the version in the ebay link (by Clear Alternatives) - which as the picture shows, have larger indicator area where the whole of one side glows orange - recommmended, and as the seller says - no problem come MoT time...

xxx

[Snips]

I've seen these on Monsters and I was gobsmacked :thumbsup:

[Scotty]

ive seen better ;)

[Nickj]

Got one as well, easy fit and does look rather nice too.
Also fitted a very small 5 led plate light too.

Its worth checking Clear Alternatives US site for prices depending on the exchange rate it can be cheaper. The current price for the light board and resistors is $75 US ( £ 38). 7 day delivery is pretty cheap. When I got mine the all up cost was £42 and it turned up 3 days later :thumbsup:

While on electronic gizmos do any of our Norfolk folk know if Scorpio electronics in Kings Lynn are still trading? Mark Tsang there was able to download the data from Ducati clocks and reprogram it into another set (new or used). Instant fix and the odometer readings stayed the same.

[faulkss]

YoungDucS4R - Dont spose you have any pics of it installed?

[YoungDucS4R]

YoungDucS4R - Dont spose you have any pics of it installed?



Sorry about the poor quality of photo but I took it in the shed. Its pi55!ng down outside!!

http://i264.photobucket.com/albums/ii172/YoungDuc/UKMOC/Intlight.jpg

[faulkss]

Thanks, that is up there on the sexy factor.

Order placed!

Now i need a tail tidy to match so that i dont have the standard holes :)

[YoungDucS4R]

.....................Now i need a tail tidy to match so that i dont have the standard holes :)

You might want to look at one of these...........
£120 from www.shift-tech.com in USA, but I think they're made in Germany.
I fitted one to my first S4R. Certainly looks the dogs.....

http://i264.photobucket.com/albums/ii172/YoungDuc/UKMOC/monster_tail.jpg

[faulkss]

:eyepopping: :dizzy:

That looks good even off the bike!!!

[faulkss]

hmmm ... it also requires an 85mm chop ...

not realy sure if i want to hack into my bike... :on:

[YoungDucS4R]

hmmm ... it also requires an 85mm chop ...

not realy sure if i want to hack into my bike... :on:

Go on!! Do it!! Its painless!!
2 minutes with the angle grinder and its done!!

You can always do the reversable YoungDucChop.
Follow the bottom of this thread...........
http://www.ukmonster.co.uk/monster/showthread.php?t=26096&page=2

[faulkss]

before

http://fnfphotos.com/personal/posts/20080602/1.jpg

After

http://fnfphotos.com/personal/posts/20080602/2.jpg

Now to sort that tail tidy so that it does not look like it is missing the indicators

[Snips]

Much, much, better... now for the full chop??

[faulkss]

not the full chop ... just something smaller and without the 'wings'

[faulkss]

oh and now need to do something with the front indicators :)

[Snips]

not the full chop ... just something smaller and without the 'wings'

Check out the CF 'Fender Eliminator' for the Monster here...

http://www.shift-tech.com/

[faulkss]

that is the one that YoungDucS4R posted... but it needs a 85mm chop ... and i am too much of a sook to do that

[manwithredbike]

Check out the CF 'Fender Eliminator' for the Monster here...

http://www.shift-tech.com/

only $254!! don't they know there's a credit crunch going on.