almost complete m900..breaking..

[stef]

yes, that's right..sniff..
not really selling, but rather giving a few bits away.
(except maybe big worthy stuff.. i need to cut my losses financially !)
so if there is something you need, the odd clamp, bolt(s), pipe, just let me know, i'll see what i can do.
(i got so much from the forum, it's time to give it back !)

[squiffything]

OOO stef I'll have first dibs on that fancy gizmo headlight electric whizzymethingy that over all those months of making my advice must have helped.

Nah just kidding it wouldn't look right on the hyperwotsit.

Thinking though couldn't you just put up the old bike for sale on ebay? Buyer collects from Dover. It must be legal in this country if not in France.

[exeterboy]

This will be interesting!!
How much ?

[stef]

This will be interesting!!
How much ?

if i get 1k out of it, i'd be a very happy man !

[stef]

Thinking though couldn't you just put up the old bike for sale on ebay? Buyer collects from Dover. It must be legal in this country if not in France.

afraid not. i need to keep a few bits and pieces, like most of my CF stuff, a few spares like starter motor, regulator.. so all in all, i wouldnt be selling a roadworthy bike.
(it's already missing the forks, since i've put them on my new one until i fix those seals and the front wheel too )

[mad_turnips]

is there front break disk available?

[stef]

is there front break disk available?

no, but i have the brake disks if you want !
(i was hoping to sell those, but i am open to bargain basement offers ?)
in fact, they wont be available for a while (they are on the new bike, with the complete front wheel..if i'had known, i'd have swapped them yesterday..sorry !)
i'll have to keep them until a new tyre is needed.. How long can you wait ?

[mad_turnips]

in no hurry tbh

it was just if there was one about

[stef]

in no hurry tbh

it was just if there was one about

i'll try to remember to give you a shout when i swap them over again.

[squiffything]

Hows the new bike looking Stef? Did you get things sorted ok?

[stef]

Hows the new bike looking Stef? Did you get things sorted ok?

really nice actually.
very clean, not a scratch. aprt from the fork seals and front tyre, it's a peach. I bought £10 worth of seals to fix this next weekend. then i might put them back.
the clutch is the quietest one i have ever seen. i havent opened it yet, but it must have that extra disc in (that mod to silence it). Either that, or the Sils are just too loud (they are louder than the WRP i had)
I swapped the front wheel and fork from the old one yesterday. I was planing to ride to work today, but it was a bit wet, so i took the car instead.

I'll take some pictures as soon as i get some descent sunshine, and post them up... then i'll start tarting her up !

[Grinch]

Do you still have a seat as I would be interested.

Don't PM me as it doesn't work, e-mail me at lgmdaniel at gmail.com

[stef]

Do you still have a seat as I would be interested.

Don't PM me as it doesn't work, e-mail me at lgmdaniel at gmail.com

sorry, seat's gone already (french equivalent of UKmoc)

[Johnnyg]

Hi Stef - do you have the brackets that go between the top yoke and the handlebars? ie the brackets that the handlebars sit on. Thanks, Johnny.

[stef]

sorry, claimed already !

[katana]

How much for the brit headlamp?

[stef]

How much for the brit headlamp?

PM sent...

[Blah blah]

Front wheel ?

[stef]

Front wheel ?

currently on my new bike..(tyre was knackered)
sorry !

[james6573]

hi do you have the rear piece which holds the indicators and number plate available? thanks

[stef]

hi do you have the rear piece which holds the indicators and number plate available? thanks

nope sorry, was using a CF bug eye tail.

[damon]

Gold 4 pot calipers with a 65mm spacing? Cant you tell im quoting our very own dave g :)

[tctopcat]

Hi

Do you have mirror(s) available? I need a r/h but would buy the pair if not original?

Cheers
Tom

[stef]

Hi

Do you have mirror(s) available? I need a r/h but would buy the pair if not original?

Cheers
Tom

i might do.
i cant remember what i've done with the old ones..
i'll try to check asap.

[tctopcat]

Cheers Stef

[mike!]

hi is the seat and the tank still for sale? if so how much posted and what colour and condition is the tank? and any pics of the whole bike?
chers
mike

[stef]

hi is the seat and the tank still for sale? if so how much posted and what colour and condition is the tank? and any pics of the whole bike?
chers
mike

they went last week.

[DavidT]

Are you also selling off the 'big bits' - I am searching for an Alloy 900 swining arm for an early 'bike?

[stef]

Are you also selling off the 'big bits' - I am searching for an Alloy 900 swining arm for an early 'bike?

i wouldm but postage from france would make it too expensive.

[TheDuke]

As it says above fella, would also love to be able to pick it up tomo fella, if your about?!

It's prob gone but i thought i'd ask, thanks

TheDuke

P.s. All the rear calipers are the same arnt they? as mine is a M600. forgot about that bit!!?

[monkib0y]

Hello! You wouldn't have the speedo cable and drive unit for sale would you?
Cheers,
Evan

[Cain]

Do you have the rear break light switch.

[w108rna]

Do you have a fuel tank?

Mark

[stef]

Do you have a fuel tank?

Mark

gone a while back !

[w108rna]

gone a while back !

Thanks anyway.

[mediumdave]

do you have left hand switch gear? my left indicator switch has gone on strike and has so far resisted all attempts with contact cleaner, wd40 etc etc, also can't get the bloody thing apart as the mounting screws are a bit chewed up !! bugger, also does your 'breaker' have adjustable levers? if so I'd definitely be interested...

cheers

dave

[m600_888_900ss]

Do you have the engine still??

Andy

[stef]

Do you have the engine still??

Andy

i do, couple of bits missing, but 95% complete.

[Kato]

Hi Stef have you still got the loom ! is it 2 or 3 phase

[stef]

Hi Stef have you still got the loom ! is it 2 or 3 phase

i do have the loom.
front was hacked off (for the headlight/dash conversion) but the rest is fine.
how do i tell about the phase thing ? (it's a 96-97 or 98)

[Kato]

I should have said 1 or 3 phase no matter, the difference is there will be 2 or 3 yellow wires for the charging system, thats the multi-plug that goes to the alternator, left hand side casing

[stef]

I should have said 1 or 3 phase no matter, the difference is there will be 2 or 3 yellow wires for the charging system, thats the multi-plug that goes to the alternator, left hand side casing

from memory, it's two wire (the same number of connector under the left side pod ?)

[ladybird]

have you got any of those large round bolts that screw the seat cowl down?
:)

[stef]

have you got any of those large round bolts that screw the seat cowl down?
:)

nope sorry

[m600_888_900ss]

How much for the engine and where are you?

Andy

[stef]

How much for the engine and where are you?

Andy

£450 for the engine, and i am in France ! (normandy)

[nik_the_brief]

have you got any of those large round bolts that screw the seat cowl down?
:)

http://www.ukmonster.co.uk/monster/showpost.php?p=182189&postcount=13

There are a couple of threads about replacement bolts for the cowl but this post is the most succinct!

HTH

[dotcaf]

Hi,
Do you still have the black metal cross thing that goes behind the number plate and has a red reflector on the bottom of it? (I know which bit I mean!)
Charles

[stef]

Hi,
Do you still have the black metal cross thing that goes behind the number plate and has a red reflector on the bottom of it? (I know which bit I mean!)
Charles

nope, i didnt have one..
but i made one for my new bike consisting of a short piece of metal, with 2 holes lined up with the reg plate holes. the bottom of this piece sticks out at the bottom of the reg plate, enough to put a self adhesive reflector.
you remove the reg plate, insert this, put the reg plate back and there you go.
dead easy.