eonan
17-06-2007, 04:14 PM
***SOLD***
Fits Ducati Monster (exc.S4R,620,800); Ducati ST2/ST4; Ducati Monster 800S
Black
1” longer than stock length
Only markings are on the footplate and a slight scuffing on the toe peg.
The blurb from CycleCat
NEW! It is a bit of a departure for Cycle Cat to make a side stand, but in the case of the Ducati Monsters, theres were so many reasons to do so, and so many customers requesting side stands, that we added the DKS series to our line.
The design intent with the DKS side stands was to address the modifications to ride height made by many Monster owners, as well as make it possible to improve the resting angle on many Monsters equipped, as stock, with side stands which seem a little too short, resulting in an extreme, and often alarming, attitude for the bike when parked. We wanted to accomplish this with a very strong, very stable solution which was not only lighter than the stock piece, but hopefully, more beautiful as well.
To address all of the design criteria, we settled on four products, identical in function, but each of a different length, keeping the engineering simple and elegant. Of course, we included Cycle Cat's proprietary adjustable retraction stop, which enables the user to adjusted the retracted position of the stand, for clearance of aftermarket pipes, or simply, adjustment for rider preference.
£65 inc P&P
Fits Ducati Monster (exc.S4R,620,800); Ducati ST2/ST4; Ducati Monster 800S
Black
1” longer than stock length
Only markings are on the footplate and a slight scuffing on the toe peg.
The blurb from CycleCat
NEW! It is a bit of a departure for Cycle Cat to make a side stand, but in the case of the Ducati Monsters, theres were so many reasons to do so, and so many customers requesting side stands, that we added the DKS series to our line.
The design intent with the DKS side stands was to address the modifications to ride height made by many Monster owners, as well as make it possible to improve the resting angle on many Monsters equipped, as stock, with side stands which seem a little too short, resulting in an extreme, and often alarming, attitude for the bike when parked. We wanted to accomplish this with a very strong, very stable solution which was not only lighter than the stock piece, but hopefully, more beautiful as well.
To address all of the design criteria, we settled on four products, identical in function, but each of a different length, keeping the engineering simple and elegant. Of course, we included Cycle Cat's proprietary adjustable retraction stop, which enables the user to adjusted the retracted position of the stand, for clearance of aftermarket pipes, or simply, adjustment for rider preference.
£65 inc P&P