View Full Version : pin wrench
S4Rs-Tone
24-04-2007, 06:41 PM
need to adjust rear shock apparently i need a pin wrench , does any 1 know whether this is something easy to buy , or can i use something else , tried hammer and chisel didnt work!!!!!!!!!!
crust
24-04-2007, 07:34 PM
They are the best for the job, although not the easiest.
http://www.justoffbase.co.uk/32-76mm-Cap-Adj-Hook-Wrench-68857-Draper-HWC;jsessionid=ac112b791f43647f251b27724402ae97c9f df4d64c99.e3eTaxeKbh0Te34Pa38Ta38La390?sc=9&category=1108
The punch and hammer will work but they tend to muller the ring a bit.
The rings probably not been moved for a while, soak it in WD40 or plus as for a day or so first and it'll go a lot easier.
:)Crust
would that not be a c spanner ur after would've thought cmw would have one ?
Rob
banditloon
24-04-2007, 10:01 PM
C Spanner is the way to go :thumbsup: Bike shop should have some, if not, maybe a possibility, Halfrauds may stock them
S4Rs-Tone
26-04-2007, 06:43 PM
thanks i will take a look on saturday.
jerry
26-04-2007, 08:06 PM
57-59mm C spanner available at any decent bike shop for about £7-!0
S4Rs-Tone
26-04-2007, 08:07 PM
cheers matey.
S4Rs-Tone
29-04-2007, 09:12 AM
got a wrench and adjusted the bounce from 45mm to 28mm , what a difference, every 1 should check theres cant believe how much tighter it feels.
vBulletin® v3.8.3, Copyright ©2000-2024, Jelsoft Enterprises Ltd.