View Full Version : Monster wanted!
sparkymark
09-03-2007, 03:20 PM
Hi all,
just joined, looking for a 600/750 area Monster, preferably dahn sarf, any thoughts/advice do share!
One thing I've already encountered is the leaking tank syndrome - how easy is this (generally) to bodge/weld/etc, or do you often have to buy a new tank?
Cheers for now,
Sparky
cheeky monkey
09-03-2007, 03:26 PM
see lord vaders post
Scotty
09-03-2007, 04:11 PM
ive only managed to solder the joint myself just couldnt get on with brazeing, i found it all very annoying , a second hand tank is around the 100 mark though most of em on ebay have dents in them from where the bars hit (in the event of a drop/crash)
sparkymark
12-03-2007, 07:29 PM
Yes, brazing the tank sounds a pain! Thanks for the info - I notice there's a few tanks on ebay for near the 400quid mark... Thought that was a bit adventurous!
Blah blah
27-03-2007, 08:00 PM
Rather than spend several hundred squid on a new tank MPS do a tank sealant for about £15. Worked a treat for me on a modified Harley tank, didn't leak at all.
i brazed two tanks myself... not that difficult ! the hardest bit was to get it slowly to temperature.. that took a good 10mins.. the rest was easy enough.
and i should mention that the last time i brazed anything was 20 years ago, at college !
crust
27-03-2007, 09:37 PM
I silver soldered mine and did all the joints round the mounting plate.
Not had a problem since.
Got the solder from here:
http://www.cupalloys.com/products.php?productId=62
:) Crust
vBulletin® v3.8.3, Copyright ©2000-2024, Jelsoft Enterprises Ltd.