Standard bar clamps

[Dave G]

Anyone got a set of clamps to secure a set of 7/8th" bars to my top yoke.
I'm fairly sure these are a universal item,please correct me if I'm mistaken.
The ones that are fitted to the SR series are larger so I cant use them with the jota bars I have.

[paynep]

I think I may have a set from a 620, but i'll have to get up in the loft tomorrow to check the size..........

[eonan]

Dave I have a set here too...let me know if paynep's don't fit :thumbsup:

[Dave G]

I've spoken briefly to Stuart at spareshack about these and the bolt spacing may be different on mine.From memory, mine are around 40mm or so front to back(might be 38 as I didnt measure them very carefully at the time) and the ones spareshack had were 32 from another monster.
If you kind folk take the trouble to look these out could you please measure the gap between the clamp bolt holes please. I'll measure mine more carefully today.

[eonan]

The ones I have here are 32mm mate.

[paynep]

OK, I have a pair of top clamps from a 620 with 38mm bolt spacing and what looks like a 7/8" bar diameter. On the 620 the bottom half of the clamp is integral with the top yoke, so I don't know if mine are any use?

The older 600/750 etc had the 32mm bolt spacing........

HTH, Paul

[Dave G]

Ooh!, so close,thanks Paul but I'll probably need the whole clamp as mine comes off leaving only the stumps on the yolk.
Thanks for checking guys.
The search continues....