View Full Version : Fork Oil
Hi Folks
does anybody know what weight fork oil should be in the adjustable forks on my 900ieS as it has not been changed since I got the bike new in 2001 and apparently it should have been.
Many thanks
Ian:confused:
Hi Folks
does anybody know what weight fork oil should be in the adjustable forks on my 900ieS as it has not been changed since I got the bike new in 2001 and apparently it should have been.
Many thanks
Ian:confused:
I thought they all took SAE 7.5
Should get changed every two years!
steve wright
12-06-2006, 07:13 PM
sae 7.5 is standard but some suspension tuners recommend sae 5, which co-incidentally is probably what you've got after 5 years of hammering up and down through small holes!
Pedro
12-06-2006, 10:25 PM
As a slight side issue, the Hyperpro spring set I have came with 2.5 weight oil - supposed to make the fork action quicker and more supple
Ped
Hi Folks
Slight problem with 7.5 weight oil, none of the local bike shops have it but I have been told if I mix equal quantities of 5 and 10 weight oil together I will end up with 7.5 weight, seems possible but could do with some confirmation before trying it.
Ian
Pedro
24-06-2006, 09:44 PM
Hi Ian
mixing 5 and 10 is ok to get 7.5. I was going to do that before getting hold of the Hyperpro kit
Ped
http://www.hagon-shocks.co.uk/Fork_Springs.htm
mail order, unless you're in a huge rush.
CK & AK
24-06-2006, 10:29 PM
Ian, sorry AK missed your call earlier.
He says he has heard of the ability to mix the oil, but has never done it himself.
have got some 7.5 here if you want it posted?
Thanks Charlotte have one last place to try if no luck will give you a bell.
Ian
CK & AK
25-06-2006, 09:39 AM
no probs Ian.
Alan says if its not urgent we can bring it up to the DSC 2 dayer at Cadwell in August for you?
I have decided to go with 5 weight oil but does anybody know how much should be in each leg as I removed 450ml from them, does this sound about right?
Pooh
Sparky
10-07-2006, 08:16 PM
The service manual for the M1000 says 465ml for each leg.
Chris
Pedro
10-07-2006, 09:16 PM
Ian
according to Haynes
From frame VIN 009915,
Marzocchi 40USD/REG
Oil Level = 90mm (measured from top of the tube with fork springs removed and forks fully compressed)
Oil capcity = 390cc
Hope this helps, let me know if your bike has Showa forks as the volume is different
Ped
thanks Ped, did not measure distance but will report back if I fall off.
Pooh
vBulletin® v3.8.3, Copyright ©2000-2024, Jelsoft Enterprises Ltd.