PDA

View Full Version : disc variants compatability type stuff..


A Yerbury
24-10-2005, 10:24 PM
so just to check -feel free to add your own- but are the following the same as the early monsters....supersports/916/748/guzzi 1100 and fzr1000 (exup etc)
I need one thats all.

Thanks.
Alex.

Dave G
24-10-2005, 11:07 PM
As far as I know they are all the same ...320mm with 10mm offset,all Ducati models(except my blasted S2r) :burnout:

A Yerbury
24-10-2005, 11:10 PM
I think the later ie ones, the 999 and 749 are diff too? I have my eyes on some... boring "how to upgrade brake" pictures probably not to follow.

Alex.

Dave G
24-10-2005, 11:15 PM
Me too,got the whole lot in the garage waiting for the baby to sleep for more than five minutes to enable me to bolt it on....but then I realised it'll look crap against the other side-coffin M/C and nonadjustable bar,so have started the hunt for that side too.
Damn,does it never end?

A Yerbury
24-10-2005, 11:18 PM
probably not, still there be bargains out there and I am 99% sure the old Yams use the same discs.....at least you had 2 discs to start with.

Alex.

ps.the whole "only use titanium" lark is BS apparently.

Paranoid Dave
24-10-2005, 11:19 PM
isnt the cagiva mito disc a match too?

A Yerbury
24-10-2005, 11:22 PM
isnt the cagiva mito disc a match too?

hey another avenue!! thanks... it's not about all eyes on the ebay ducati pages after all.

gary tompkins
24-10-2005, 11:22 PM
Aprilia discs and calipers (Mille & Falco) are brembo and should fit too. They also use the same wheels as wll I think, and cheaper than marchesini's flogged for ducati's if you get lucky.

A Yerbury
24-10-2005, 11:26 PM
thanks GT, and so is the RS 125! was the mito on the left or the right? I take it (I am guessing but it makes sense) that the reason discs are right and left is to do with the direction that the rotor bolts are threaded and done up?? lets see if I can get a pair for under twenty quid then....

Pedro
24-10-2005, 11:27 PM
The only duke ones to avoid are those from the R models, know as wide track - different offset. 749/999 are different. Exup and RSV Mille discs are good too - Mille calipers are red too I think if you're going for a coordinated look.

A Yerbury
24-10-2005, 11:29 PM
The only duke ones to avoid are those from the R models, know as wide track - different offset. 749/999 are different. Exup and RSV Mille discs are good too - Mille calipers are red too I think if you're going for a coordinated look.

yeah I saw some mille red calipers but I was not sure of fitting? anyway got a pair of brems for 50 quid so thats done....just disc (two prefferably as I suspect the front is a tad warped/old) and a bit of hose needed now...

gary tompkins
24-10-2005, 11:32 PM
...Mille calipers are red too I think if you're going for a coordinated look.

The red snakeskin comment last night was obviously a dead givaway Yerbs ;)

A Yerbury
24-10-2005, 11:36 PM
The red snakeskin comment last night was obviously a dead givaway Yerbs ;)

you know me too well darhling. Are these the bad boys you refered to?

http://cgi.ebay.co.uk/APRILIA-RSV-MILLE-2000-WHEELS-DISCS-TYRES_W0QQitemZ8009727334QQcategoryZ78417QQrdZ1QQc mdZViewItem

Pedro
24-10-2005, 11:37 PM
thanks GT, and so is the RS 125! was the mito on the left or the right? I take it (I am guessing but it makes sense) that the reason discs are right and left is to do with the direction that the rotor bolts are threaded and done up?? lets see if I can get a pair for under twenty quid then....

Left and right discs on mine use the same bolts, no opposite threads

A Yerbury
24-10-2005, 11:40 PM
Left and right discs on mine use the same bolts, no opposite threads


hmm this evening news gets better and better?!

gary tompkins
25-10-2005, 12:00 AM
you know me too well darhling. Are these the bad boys you refered to?

http://cgi.ebay.co.uk/APRILIA-RSV-MILLE-2000-WHEELS-DISCS-TYRES_W0QQitemZ8009727334QQcategoryZ78417QQrdZ1QQc mdZViewItem

Looks promising...

Not sure if back wheel will drop in the monster, the hub looks different. The front should go though altough you'll probably need later forks with hollow spindle. If it's only the discs you need then the wheels may be surplus to requirements anyway?

A Yerbury
25-10-2005, 12:03 AM
I was just curious really, current wheels fine and I pref the 3 pronged variety, it's just a pair of discs and I have spotted quite a few..

gary tompkins
25-10-2005, 12:17 AM
Phantom poster strikes again...


GONE!

A Yerbury
25-10-2005, 12:20 AM
Twas these them?....

http://cgi.ebay.co.uk/Ducati-748-916-Front-Brake-Discs_W0QQitemZ8008233073QQcategoryZ10448QQrdZ1QQc mdZViewItem

http://cgi.ebay.co.uk/DUCATI-748-916-996-998-BRAKE-DISCS_W0QQitemZ8008228346QQcategoryZ10448QQrdZ1QQc mdZViewItem

http://cgi.ebay.co.uk/DUCATI-916-BREMBO-FULL-FLOATING-DISCS-PAIR_W0QQitemZ8009168050QQcategoryZ10448QQrdZ1QQcm dZViewItem

http://cgi.ebay.co.uk/APRILIA-RSV1000-MILLE-BREMBO-FRONT-DISCS-VGC-VERY-RARE_W0QQitemZ8009786691QQcategoryZ10534QQrdZ1QQcm dZViewItem

http://cgi.ebay.co.uk/BREMBO-DISC-320MM_W0QQitemZ8008248784QQcategoryZ9946QQrdZ1QQcm dZViewItem

The last one could be handy if you already have a matching one on the other side?

Your faithfull man servant :)


err there were some others, jeez... they'll all be bidding now GT!! I'll pm you!

gary tompkins
25-10-2005, 12:24 AM
Ooops! well it won't be me - I don't need any discs :o

The last one could be handy if you already have a matching one on the other side?

BTW.. there seems to me a surge of 'more money than sense' w**kers on ebay wacking in OTT bids for all manor of ducati related tat. Just wish I had more to sell myself :(

Yours a miffed GT... well peed off at being constantly outbid :mad: