Abba stand

[bikeman]

I,ve got an Abba stand for an M600, but the rear brake cylinder, covers ascess to the swinging arm pivot cover any ideas?

[rxtim]

It shouldn't if you have the right adaptors and putting in the right place.

[bikeman]

I have the correct fitting kit, and using the swing arm pivot points after removing the plugs. But the offside pivot point is obstructed by the hose coming from the rear brake pump.

[moony]

..........

[rxtim]

I'll check mine later, I just changed the RHS hanger with the bike on the Abba Stand, there was no problem getting at any of the bolts on the hanger or the rear brake bits. Actually getting the hanger bolts out proved more interesting!

I'll post a pic of the mount points I used for the Abba stand.

[bikeman]

If you mean like this, it's ok to swivel the plastic elbow inwards so the hose clears the adaptor. Swivel it back after removing stand or swingarm will rub on hose.
http://imagehost.darkernet.co.uk/i/abbastand2(Small).jpg


Thanks for the advice tried it works ok